Colter & Peterson Binders and Cutters Call NowContact us online
We Buy, Sell, Repair, and Move Cutters
Home New Products Rebuilt Services Parts Knife Grinding Locations International Information About

Colter & Peterson Products

Saber X15 + Paper Cutter Logo

The 141" Saber X-15 Plus paper cutter has been specifically designed for the large format print market. Its size allows operators to turn up to 5 ft X 10 ft pieces of material within the throat of the cutter. Uniquely designed with the ability to make parallel or eccentric shear cuts, the Saber X-15 Plus can cut most substrates being printed on today. Outfitted with our 15" microcut WS computer control system, programming is simple and networking is included. And the machine is backed up by the C&P warranty including two (2) full years on parts. Call our sales department for more information. Let us know if you would like a quotation.

Saber X15 cutter
  • Microcut Wide Screen (15") computerized back gauge system
  • Back gauge speed variable between 3" to 16" per second
  • Color touch screen
  • CIP-3/4 compatible
  • Network ready
  • Management information system (MIS) included
  • 141" maximum cut length
  • 141" maximum cut width
  • 5" maximum cut height
  • 8" minimum cut length
  • Heavy duty 8 inch wide clamp
  • Combination ball bearing lead screw and linear bearing back gauge
  • Brushed aluminum table surfaces with low pressure air jets
  • Multiple air blower motors for low pressure air table jets
  • Programmable from Microcut computer
  • Clamp operated by heavy duty hydraulic cylinder under center of table
  • Variable clamping force from 500 - 20,000 lbs
  • Programmable from Microcut computer
  • Variable knife speed to assist cutting various product types
  • Knife operated by hydraulic cylinders located at each side of the knife beam below table level
  • Knife change device using a central lifting unit in knife beam
  • Knife height setting and leveling is fully automated
  • Foot treadle operation of soft clamping with infrared safety curtain interruption for safety
  • Energy efficient main motors operate only during cutting/clamping
  • 460 volt, 3 phase, 60Hz, 30 amp power required
  • Infra red safety eye beams
  • Push button safety controls
  • Meets all US, CSA and CE safety requirements
  • Two high speed blades
  • Twelve plastic cutting sticks


Binder and Cutter Equipment Products


>Paper Cutters

   Saber X15
   Saber XXL
   Saber X15 Plus
   Schneider Engineering

>Robotic Cutting System

   Schneider Engineering

>Precision Sheeters


>Paper Handling

   C&P Peripheral
   Schneider Engineering

>Three Knife

   Accutrim HD

  Control systems

   Micro Cut

International Distributor